581 1118
HCE-C1100D
kr.29,900
High Dynamic Range (HDR) Rear View Camera with Direct Camera Connection
Thanks to HDR technology, the picture quality is much better compared to regular camera systems – for easier maneuvering and greater safety.
A rear view camera is a great way to improve your parking skills and make reversing safer. The camera image automatically comes on when you shift into reverse.
The cameras are very small, so they’re easy to install and don’t change the appearance of the car.
Works with Alpine products featuring Direct Camera Input.
SPECIFICATIONS
Dimensions
- Camera: 23.6x 23.6x 24.0mm (excluding projection on the rear)
- Camera Cable Length: 0.5m
- Camera Extension Cable Length: 10.5m
General
- Power Requirement: 6.0 V.DC
- Negative Ground
- Max. Power Consumption: 0.5W
- Weight Camera: 27g (including cable)
Camera
- Output Image: Mirror Image, Composite Video (NTSC Color Signal System)
- Image Output: 1 Vp-p (75 Ohms)
- Image Sensor: 1/3.7 inch CMOS Image Sensor, Aspect Ratio 4:3
- Effective Number of Pixels: 640 (H) x 480 (V), Approximately 0.3 Mega pixels
- Lens Focal Length: f=1.34mm
- Lens Brightness: F=1:2.0
- Angle of Field: Horizontal = 131°, Vertical = 103°
- S/N Ratio: 40.5 dB or more
- Resolution (Horizontal. Center Area): 330 TV Lines
- Operating Temperature: -30°C – +70°C
- Illumination Range: Approximately 1.5 to 100klx
MULTI CAMERA INTERFACE
• Connects up to 3 cameras
• Works with Alpine Direct Cameras
• Touch control of all camera views from the touch screen
• Compatible with X802D-U, INE-W710D, iLX-702D, X902D-DU and many more
• Includes Interface Box and Cable Harness
High Dynamic Range (HDR) Multi View Front Camera
This all-new front-view HDR camera system provides parking safety with cutting-edge camera technology and full touch-screen operation.
Thanks to HDR technology, the picture quality is much better compared to regular camera systems – for easier maneuvering and greater safety.
A wide viewing range provides better visibility when coming out of ‘blind’ alleys or around obstructed corners. Especially useful for reducing blind spots with SUVs, minivans or trucks.
There is a choice of three viewing modes.
SPECIFICATIONS
Dimensions
- Camera: 23.6 x 23.6 x 26.1mm (excluding projection on the rear)
- Camera Cable Length: 1m
- Camera Extension Cable Length: 3m
General
- Power Requirement: 6.0V DC (5.0 to 9.0VDC allowable)
- Ground Type: Negative Ground
- Max. Power Consumption: 1.2W (6.0V)
Camera
- Output Image: Normal image, CVBS (NTSC Video signal), for 16:9 wide-screen
- Image Output Impedance: 75 Ohms (1Vp-p)
- Image Sensor: 1/4″ Type Color CMOS Image Sensor, Aspect Ratio 16:9
- Effective Number of Pixels: 1280 (horizontal) x 720 (vertical) approximately 1.2 Mega pixels
- Lens: Focal Length: f=1.27mm
- Lens: Brightness: F=1:1.8
- Angle of Field: Horizontal = 180° , Vertical = 70°
- S/N Ratio: 41 dB or more
- Resolution (Horizontal. Center Area): 330 TV Lines
- Operating Temperature: -30°C – +70°C
- Illumination Range: Approximatly 1.5Lx to 100kLx
- Weight: 41g (including cable but not including bracket and screw)
High Dynamic Range (HDR) Multi-View Rear Camera
This all-new rear-view HDR camera system provides parking safety with cutting-edge camera technology and full touch-screen operation.
Thanks to HDR technology, the picture quality is much better compared to regular camera systems – for easier maneuvering and greater safety.
It automatically activates when reversing and also mutes the audio so you can hear the parking sensor signals.
There is a choice of four viewing modes and you can even activate a trailer hitch guideline.
SPECIFICATIONS
Dimensions
- Camera: 23.6 x 23.6 x 25.8mm (excluding projection on the rear)
- Camera Cable Length: 0.5m
- Camera Extension Cable Length: 10m
General
- Power Requirement: 6.0V DC (5.0 to 9.0VDC allowable)
- Ground Type: Negative Ground
- Max. Power Consumption: 1.2W (6.0V)
Camera
- Output Image: Mirror image, CVBS (NTSC Video signal), for 16:9 wide-screen
- Image Output Impedance: 75 Ohms (1Vp-p)
- Image Sensor: 1/4″ Type Color CMOS Image Sensor, Aspect Ratio 4:3
- Effective Number of Pixels: 1280 (horizontal) x 960 (vertical) approximately 1.2 Mega pixels
- Lens Focal Length: f=1.27mm
- Lens Brightness: F=1.8
- Angle of Field: Horizontal = 180° , Vertical = 125°
- Resolution (Horizontal. Center Area): 330 TV Lines
- Operating Temperature: -30°C – +70°C
- Illumination Range: Approximatly 1.5Lx to 100kLx
- Weight: 32g (including cable but not including bracket and screw)
High Dynamic Range (HDR) Side View Camera with RCA and Direct Camera Connection
The HCE-CS1100 is a High Dynamic Range Side View camera for Alpine devices with direct camera input or RCA connection. It includes a universal mirror mount and a long connection cable.
Thanks to HDR technology, the picture quality is much better compared to regular camera systems – for easier manoeuvring and greater safety.
A side-view camera is a great addition to the more traditional front and rear camera systems. It can prevent scratched rimes during parking or for example be used as surveillance of the side of your motor-home.
SPECIFICATIONS
Dimensions
- Camera: 23.6 x 23.6 x 26.5mm (excluding projection on the rear)
- Power Section: 38.0 x 25.0 x 15.0mm (excluding projection)
- Camera Cable Length: 0.75m
- Camera Extension Cable Length: 3.5m
- Power Unit (Reverse/ACC/Video/GND): 3m
General
- Power Requirement: DC 9V to DC 15.6V
- Power Consumption: 1.2W (12V)
- Operating Temperature (Power Section): -30°C – +70°C
- Weight Camera: 33g (camera only)
- Weight Power Section: 83g (including cord)
Camera
- Ground Type: Negative Ground Type
- Output Image: Composite Video NTSC
- Image Output Impedance: 75 Ohms (1Vp-p)
- Image Sensor: 1/3.7 inch CMOS image sensor, Aspect Ratio 4:3
- Effective Number of Pixels: 640 (H) x 480 (V), Approximately 300,000 pixels
- Lens Focal Length: f=2.8mm
- Lens Brightness: F=1:2.0
- Angle of Field: Horizontal = 82.7° , Vertical = 60.5°
- S/N Ratio: 40.5 dB or more
- Resolution (Horizontal. Center Area): 330 TV Lines
- Operating Temperature: -30°C – +70°C
- Illumination Range: Approximatly 1.5Lx to 100kLx
Dual Multi-Camera Interface allows connection of one or two direct connection cameras to a screen with RCA Input
Enables connection of one or two Multi-View cameras to screens with RCA input. Includes switch for camera image display on or off. Using the MODE button you can switch between viewing modes. Cameras turn on automatically when reversing.
Specifications
General
- Output Image: Normal image, CVBS (NTSC Video signal) 16:9 Image output for wide-screen
- Image Output impedance: 75 Ohm (1Vp-p)
- Power Requirement: 12 V.DC
- Negative Ground
- Power Consumption: Less than 1.7W (12V)
- Operating Temperature: -30°C – +80°C
- Weight Power Section: 109g (including cable)
- Weight Switch Section: 50g (including cable)
Dimensions:
- Power Unit: 100 x 50 x 25mm
- Switch Section: 29 x 38.5 x 13.6 mm
- Power Unit Cable: 2m / 6m
- RCA Extension Cable: 2m
- Switch Cable: 3m